Grass Valley iControl V.6.02 - Manual (Page 470)

Fingerprint Comparison and Analysis
Unassigning Sources from a Comparison Group
460
2. Edit the comparison group properties as required, and then click OK.
The Comparison group properties window disappears and an asterisk (*) appears beside
the name of this group in the Fingerprint comparison setup area of Audio Video
Fingerprint Analyzer.
3. Click Apply all to save configuration changes to the comparison group.
The asterisk following the name of your comparison group disappears, indicating the
configuration changes have been saved.
Unassigning Sources from a Comparison Group
Unassign sources from a comparison group to remove one or more probed sources being
compared.
To unassign a source from a comparison group
1. On the Configuration tab, in the Fingerprint comparison setup area, expand the the
comparison group folder representing the group the source you would like to remove
belongs to.
Note: When editing the properties of an existing comparison group, the
Comparison group properties window does not allow you to alter the number of
audio channels configured for the group. This parameter may only be set when the
group is initially configured.
IMPORTANT: If you change the name of your comparison group, make sure you also
update the alarm assignments to the group.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened Audio Video Fingerprint Analyzer (see page 579 ).
• There are currently no comparisons underway for the comparison group you would like
to edit.