Grass Valley iControl V.6.02 User Manual
Page 442
Advertising
iControl and SNMP
Adding an Object from an SNMP Table
432
11. Close the SNMP Table window.
12. Click and drag the MIB parameter from the MIB Browser window onto the Web page.
The corresponding alarm object appears on the Web page, showing the actual status of the
MIB parameter.
Note: You may receive an error message. This is because the alarm object, by
default, points to the index of the SNMP table, not the specific table entry.
Keep the mouse cursor hovering over a cell in the
table to view its index number (row, column)
Advertising
This manual is related to the following products: