Grass Valley iControl V.6.02 - Manual (Page 275)

iControl
User Guide
265
2. Leave the Superior referral IP field empty.
3. Click Initialize.
4. Select the Run LDAP service on this Application Server check box.
As the LDAP service starts up, the iControl—admin page reloads.
5. In the Domains Managed Here area, click Add.
A window appears, prompting you to type a domain name.
6. Type the local domain name, and then click OK.
The newly added local domain appears in the list under Domains Managed Here.
At this point, the LDAP service is running on the Application Server, and configured for a
single domain.
Configuring the LDAP Service on an iControl Application Server for Multiple
Domains
Note: If this Application Server has previously been used to run an LDAP service,
the button will be labelled Reinitialize.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened the iControl—Access control page (see page 556 ).
• You have read "Rules for Local Domains" on page 268.
• You have the illustration "Sample Multi-Domain Setup" on page 268 available as a
reference.