Grass Valley iControl V.6.02 - Manual (Page 229)

iControl
User Guide
219
To create a proc amp device
1. On the iControl—Services management page, verify that the Virtual Service Manager is
active (green).
2. Open iC Navigator (see page 566 ).
3. Click the Logical view tab.
4. Double-click the Virtual Service Manager row.
The Virtual Service Manager control panel appears, with the first of three pages (Type)
displayed.
5. Select Proc amp, and then click Next.
The Configuration page appears.
Note: Make sure that the Virtual Service Manager is visible.
Virtual Service
Manager active