Grass Valley iControl V.6.02 User Manual
Page 245
iControl
User Guide
235
Saving a Device’s Current Configuration Data as One of its Presets
To save a device’s curren configuration data as one of its presets
1. In Device Profile Manager, click the Presets tab near to the top.
The Presets tab displays listings of discovered or preset devices.
2. For each of the selected devices, perform the following steps:
a) In the Preset column, select the preset to which you would like to save configuration
data.
b) In the Apply column, for each device with active configuration data you would like to
save to a preset, select the check box.
3. Click Save to preset.
A confirmation window appears.
4. Click OK in the confirmation window.
Navigating with the File Browser in the Open Window
To navigate with the file browser in the Open Window
1. In Device Profile Manager, perform only ONE of the following steps, depending on your
requirements:
•
If you are exporting, on the Export tab, click the File browser button (
) near the
bottom, right side of the window.
REQUIREMENT
Before beginning this procedure, make sure you have opened Device Profile Manager
(see
).
REQUIREMENT
Before beginning this procedure, make sure you have opened Device Profile Manager
(see
).