Grass Valley iControl V.6.02 - Manual (Page 373)

iControl
User Guide
363
3. Make sure the current setting for manual grace period duration is the desired duration
period by performing the following steps.
a) In the GSM Alarm Browser, click the Admin tab, and then click the Configuration tab.
b) In the Properties area, edit the grace period in the Manual grace period duration
field, as required.
c) Click Save.
4. If you would like to invert only one alarm, right-click the appropriate alarm, point to
Operational mode, and then select (or clear) Inverted, as required.
The associated alarm’s Inverted mode is set to On (or to Off, depending on your inversion
action).
5. If you would like to invert more than one alarm, perform the following steps:
a) Click the first alarm you would like to invert.
b) Hold down the Ctrl key and individually click the remaining alarms.