Grass Valley iControl V.6.02 - Manual (Page 169)

iControl
User Guide
159
6. Click OK.
Creating an Incident Template from the GSM Alarm Browser
To create an Incident Template using the Alarm Browser
1. In the GSM Alarm Browser, select one or more nodes from the Alarm Browser’s tree.
2. Right-click one of the selected nodes and click Create incident template.
The Incident template configuration window appears with the selected alarms
automatically added as sub-alarms.
Note: For a given incident template, there can only be one incident open at a time.
Once the open incident is cleared, the template can be triggered at any time by a
subsequent alarm, whereupon a new incident (with a new ID) will be opened.
REQUIREMENT
Before beginning this procedure, make sure you have opened the GSM Alarm Browser
(see
page 577 ).