Snoozing an alarm – Grass Valley iControl V.6.02 User Manual
Page 370
Alarms in iControl
Snoozing an Alarm
360
To check the operational mode of an alarm
• Right-click the status icon of the alarm, point to Operational mode, and verify which of the
operational modes are active, if any.
Snoozing an Alarm
To snooze an alarm
• In either the iC Web page, iC Navigator, the GSM Alarm Browser, or Incident Log Viewer,
right-click the appropriate status icon, point to Snooze, and then do one of the following:
Note: The same shortcut menu is available in both iC Web and iC Navigator, to
make it easy for operators to manually enable, disable, or check the operational
mode for selected alarms.
Note: The system can be configured to always report a normal status instead of the
real status for suppressed alarms. In such a case, the overall channel status icon
would be green instead of showing the real status. The default behavior is to show
the real alarm status. Should you need your system configured in such a way, please
contact the Grass Valley technical support team (see
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• If you are working in iC Web, make sure you have opened the appropriate iControl Web
• If you are working in iC Navigator, make sure you have opened iC Navigator
).