Grass Valley iControl V.6.02 - Manual (Page 84)

Getting Started with iControl
Densité Probe Bandwidth Requirements
74
Densité Probe Bandwidth Requirements
The tables below provide typical bandwidth (bit rate) requirements (per card) for Densité
cards capable of audio/video streaming (SCP-, ACP-, VCP- and DCP-series).
Thumbnails
IP (Waveform + Vector) Scope
Remote Audio Level Meter (RALM)
Size Poor Quality Medium Quality High Quality
--- Refresh Mode: Fast ---
Small 80 × 60 pixels 8.9 kb/s 11 kb/s 14.5 kb/s
Medium 160 × 120 pixels 19 kb/s 23 kb/s 35 kb/s
Large 320 × 240 pixels 55 kb/s 68 kb/s 85 kb/s
--- Refresh Mode: 1 second ---
Small* 80 × 60 pixels 1.9 kb/s 2.2 kb/s 2.9 kb/s
Medium* 160 × 120 pixels 3.8 kb/s 4.6 kb/s 7 kb/s
Large 320 × 240 pixels 11 kb/s 13.6 kb/s 17 kb/s
* Very low bit rate optimized for transmitter site and cell.
--- Refresh Mode: 10 seconds ---
Small 80 × 60 pixels 0.9 kb/s 1.1 kb/s 1.4 kb/s
Medium 160 × 120 pixels 1.8 kb/s 2.4 kb/s 3.5 kb/s
Large 320 × 240 pixels 5.5 kb/s 6.8 kb/s 8.6 kb/s
Compression type VBR; variation of ± 20%
Refresh Speed Fast 1 second 10 seconds
Bit Rate 5 kb/s 1 kb/s 0.1 kb/s
Refresh Speed Typically 40 – 60 ms
Bit Rate 0.33 – 0.8 kb/s