Grass Valley iControl V.6.02 - Manual (Page 504)

Backup and Redundancy
Reconfiguring an Offline, Configured Main Application Server in a Backup Role
494
5. Identify A2 in the Backup area.
6. In the row corresponding to A2, click Remove in the Removal column.
7. Click OK in the confirmation window.
Once the iControl—Redundancy configuration page has refreshed, note that A2 is not listed
among the Application Servers in the Redundancy Group.
8. Identify A1 in the Main area.
9. In the row corresponding to A1, click Remove in the Removal column.
10. Click OK in the confirmation window.
Once the iControl—Redundancy configuration page has refreshed, note that A1 is no longer
listed among the Application Servers in the Redundancy Group.
11. If you are performing this procedure with only one configured Main and one configured
Backup, (that is, only A1 and A2 in the Redundancy Group), perform the following steps:
a) In your browser’s address bar, type the IP address of A2.
b) Navigate to the iControl—Redundancy configuration page (see page 559 ).
c) Click Click here to create a new Redundancy Group with this server as a MAIN.
The iControl—Redundancy configuration page refreshes, displaying A2 in the Main
area.
d) In the Backup area, type the IP address of A1.
e) Click Add this Backup (next to the IP address you just typed).
The iControl—Redundancy configuration page refreshes, displaying A1 has been added
to the Backup area.