Grass Valley iControl V.6.02 - Manual (Page 354)

Alarms in iControl
Adding an Action to a Specific Alarm
344
The Alarm properties window appears.
2. In the Actions area, click Add.
The New action window appears.
3. Select an appropriate action from the list (e.g. if you wish to have an e-mail sent to someone
when the specified alarm is triggered, choose the Send e-mail action).
4. Click New.
A window appears allowing you to configure the global action.
5. Once you have finished typing configuration details, click OK.
The new action appears in the Actions section of the Alarm properties window.
Note: The content of this window varies according to the type of action you have
chosen.
IMPORTANT: System behavior
Even though the SNMP agent plug-in appears in this list, it is, by definition, a
global action, and cannot be attached to a specific alarm. For more
information please see
"Configuring the GSM as an SNMP Agent" ,
on page 410.