Grass Valley iControl V.6.02 User Manual
Page 58
Advertising
Getting Started with iControl
Connecting to a New iControl Application Server
48
Connection between client PC and Application Server
Rear view of R310 Application Server, showing logical ports eth0 and eth1 (physical ports Gb1 and Gb2,
respectively)
Note: The default IP address and subnet mask settings for the Application Server
when shipped from the factory are shown on a sticker on the top cover of the chassis
above the front-panel power switch. The factory default is
10.0.3.6.
Gb1
Gb2
Advertising
This manual is related to the following products: