Grass Valley iControl V.6.02 - Manual (Page 222)

Configuring Devices & Services
Working with Densité Communicators
212
Under Server Type, the setting standalone should be selected. You can safely ignore all
other settings in the Configuration tab—this functionality has been superseded by other
iControl modules.
6. Click the Info tab.
Type (or modify) the values in the Label, Short Label, Source ID and Comments fields.
These values are typically visible in the main iC Navigator window.
7. Click Advanced to view the Long ID.
8. Click Details to obtain manufacturing process and window version numbers.
9. Click the Configuration tab, and then click Online to reactivate the Imaging
Communicator.
Working with Densité Communicators
Densité Communicators (see "Communicators" , on page 200) allow you to monitor and
control cards housed in Grass Valley Densité frames.
Densité frames are connected to an Application Server over a standard Ethernet network. In
order to establish communications between the Densité frame and the Application Server, a
Communicator service must be configured and activated for each frame. If the service is not
configured, you will not be able to monitor or control the Densité frame, even if it is
connected.
Note: Because of the one-to-one correspondence between Densité frames and
Densité Communicators, the terms are used interchangeably.