Grass Valley iControl V.6.02 User Manual
Page 163
iControl
User Guide
153
To add a column to the results table of Event Log Viewer
• In Event Log Viewer, on the Columns menu, point to Add other columns, and then click
on a column selection.
OR,
Right-click anywhere in the results table, point to Add other columns, and then click on a
column selection.
The column appears in the results table.
Adding a Column to the Results Table in Incident Log Viewer
To add a column to the results table of Incident Log Viewer
• In Incident Log Viewer, right-click anywhere in the column header row of the results table,
point to Add other columns, and then click on a column selection.
The column appears in the results table.
Adding a Custom Timestamp Column to the Results Table
You can add a custom timestamp column to the results table of either Incident Log Viewer or
Events Log Viewer.
Adding a Custom Timestamp Column to Incident Log Viewer
To add a custom timestamp column to Incident Log Viewer
1. In Incident Log Viewer, right-click anywhere on the header row of the results table, point
to Add other columns, and then click Custom timestamp.
The Custom timestamp column settings window appears.
2. Fill in a column header label, time format, base column timestamp (GSM or Timestamp),
and time zone.
3. Click OK.
The new custom timestamp column appears as the far right column.
REQUIREMENT
Before beginning this procedure, make sure you have opened either Event Log Viewer or
Incident Log Viewer as required (see
REQUIREMENT
Before beginning this procedure, make sure you have opened either Event Log Viewer or
Incident Log Viewer as required (see