Grass Valley iControl V.6.02 - Manual (Page 273)

iControl
User Guide
263
Client Configuration
The Client configuration section is used to type information required by Application Servers
to enable access control. Client applications (iC Navigator, iC Creator, etc.) and services (GSM,
Densité Manager, etc.) will use the information entered here to know which domain they run
in, and where to go to access an LDAP server.
Directory Configuration
The Directory configuration section is used to type information required by Application
Servers that will be running an LDAP service.
Detailed Directions
Configuring LDAP on an Application Server
The way in which you configure LDAP depends upon your network configuration. The
procedures below describe how to configure LDAP in single and multiple domain networks.