Rockwell Automation 20P PowerFlex Digital DC Drive User Manual
Page 176
176
Rockwell Automation Publication 20P-UM001I-EN-P - February 2013
Chapter 3
Programming and Parameters
CO
M
M
U
N
IC
AT
IO
N
S
Masks
&
O
w
ne
rs
593
[Jog Mask]
Controls which adapters can issue jog commands.
594
[Direction Mask]
Controls which adapters can issue forward/reverse direction commands.
595
[Reference Mask]
Controls which adapters can select a manual reference.
596
[Accel Mask]
Controls which adapters can select the acceleration ramp rates (Pars 660
[Accel Time 1] and 24 [Accel Time 2]) of the drive.
24,
660
597
[Fault Clr Mask]
Controls which adapters can clear a fault.
598
[MOP Mask]
Controls which adapters can issue MOP commands to the drive.
599
[Local Mask]
Controls which adapters are allowed to take exclusive control of drive logic
commands (except stop). Exclusive “local” control can only be taken while
the drive is stopped.
600
[Stop Owner]
The adapters that are presently issuing a valid stop command. 0 = No Command, 1 = Issuing Command, x = Reserved.
601
[Start Owner]
The adapters that are presently issuing a valid start command.
See [Stop Owner]
602
[Jog Owner]
The adapters that are presently issuing a valid jog command.
See [Stop Owner]
603
[Direction Owner]
The adapter that currently has exclusive control of direction changes.
See [Stop Owner]
604
[Reference Owner]
The adapter that has the exclusive control of the reference source selection.
See [Stop Owner]
605
[Accel Owner]
The adapter that has exclusive control of the acceleration ramp rate (Pars
660 [Accel Time 1] and 24 [Accel Time 2]) for the drive.
See [Stop Owner]
24,
660
606
[Fault Clr Owner]
Adapter that is presently clearing a fault.
See [Stop Owner]
607
[MOP Owner]
Adapters that are currently issuing increases or decreases in MOP
referenced.
See [Stop Owner]
608
[Local Owner]
Adapter that has requested exclusive control of all drive logic functions. If an
adapter is in local lockout, all other functions (except stop) on all other
adapters are locked out and non–functional. Local control can only be
obtained when the drive is not running.
See [Stop Owner]
609
[Decel Owner]
The adapter that has exclusive control of the deceleration ramp rate (Pars
662 [Decel Time 1] and 32 [Decel Time 2]) for the drive.
See [Stop Owner]
32,
662
Fil
e
Gr
oup
No
.
Parameter Name & Description
See
page 110
for symbol descriptions
Values
Da
ta
T
yp
e
Rela
ted
Options
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
DPI P
or
t 5
DPI P
or
t 4
DPI P
or
t 3
DPI P
or
t 2
DPI P
or
t 1
Di
gi
ta
l I
n
Default
x
x
x
x
x
x
x
x
x
x
0
0
0
0
0
0
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0