Rockwell Automation 20P PowerFlex Digital DC Drive - Manual (Page 27)

Rockwell Automation Publication 20P-UM001I-EN-P - February 2013 27
Installation and Wiring Chapter 1
Figure 8 - Lifting Frame D Drives
4. Lift the drive into place onto the bolt(s) installed in the panel.
5. Install the remaining bolts into the panel. Tighten M8 bolts to a minimum
torque of 15 N
• m (132.7 lb • in) and M10 bolts to a minimum torque of 25
N • m (221.2 lb • in).
Must be less
than 45° angle