Rockwell Automation 20P PowerFlex Digital DC Drive - Manual (Page 256)

256 Rockwell Automation Publication 20P-UM001I-EN-P - February 2013
Appendix B HIM Overview
Preferences Menu
The HIM and drive have features that you can customize.
Viewing and Editing
Parameters LCD HIM
Numeric Keypad Shortcut
If using a HIM with a numeric keypad, press the ALT key and the +/– key to
access the parameter by typing its number.
Option Description
Drive Identity Add text to identify the drive.
User Dspy Lines Select the display, parameter, scale and text for the User Display. The
User Display is two lines of user-defined data that appears when the
HIM is not being used for programming.
Step Key(s) Example Displays
1. In the Main Menu, press the Up Arrow or Down
Arrow to scroll to “Parameter.”
2. Press Enter. “FGP File” appears on the top line
and the first three files appear below it.
3. Press the Up Arrow or Down Arrow to scroll
through the files.
4. Press Enter to select a file. The groups in the file
are displayed under it.
5. Repeat steps 3 and 4 to select a group and then
a parameter. The parameter value screen will
appear.
6. Press Enter to edit the parameter.
7. Press the Up Arrow or Down Arrow to change
the value. If desired, press Sel to move from
digit to digit, letter to letter, or bit to bit. The
digit or bit that you can change will be
highlighted.
8. Press Enter to save the value. If you want to
cancel a change, press Esc.
9. Press the Up Arrow or Down Arrow to scroll
through the parameters in the group, or press
Esc to return to the group list.
Sel
Esc
or
or
or
or
F GP: File
Monitor
Motor Control
Speed Command
FG P : Par 499
Fld Economy En
1
Enabled
F G P: Group
Motor Data
Field Config
Torq Attributes
FG P : Parameter
Field Reg Enable
Fld Economy En
Field Mode Sel
FG P : Par 499
Fld Economy En
0
Disabled