Rockwell Automation 20P PowerFlex Digital DC Drive - Manual (Page 29)

Rockwell Automation Publication 20P-UM001I-EN-P - February 2013 29
Installation and Wiring Chapter 1
Remove the Lower Protective Cover
Remove the two screws as shown below and, while gently lifting along the top
edge, slide the cover down and off the chassis.
Frame B and C Drives
Loosen, but do not remove, the two screws that secure the bottom cover. Then,
slide the cover down until the screw heads line up with the key holes and lift the
cover off the chassis.
STS
PORT
MOD
NET A
NET B
Frame B Shown