Frame d overvoltage clipping circuit board fuses – Rockwell Automation 20P PowerFlex Digital DC Drive User Manual
Page 237
Advertising
Rockwell Automation Publication 20P-UM001I-EN-P - February 2013
237
Supplemental Drive Information
Appendix A
Frame D Overvoltage Clipping Circuit Board Fuses
The following fuses are used to protect the resistors and capacitors on the
Overvoltage Clipping circuit board for frame D drives only.
The Overvoltage
Clipping circuit board is located on the left side wall inside the drive
enclosure, behind the control panel.
Figure 77 - Frame D Overvoltage Clipping Circuit Board Fuse Locations
Circuit Board ID / Revision
Designation
Fuse (14 x 51 mm)
CFSFxxx / All
F11/F21/F31
10 A, 690V fast
Overvoltage Clipping board fuse locations (shown with control panel open).
Advertising