Rockwell Automation 20P PowerFlex Digital DC Drive - Manual (Page 63)

Rockwell Automation Publication 20P-UM001I-EN-P - February 2013 63
Installation and Wiring Chapter 1
Table 18 - Relay Outputs and Thermistor/Thermal Switch Wire Sizes and Specifications
Figure 35 - Frame A Relay and Thermistor/Thermal Switch Terminal Block Locations
Figure 36 - Frame B Relay and Thermistor/Thermal Switch Terminal Block Locations
Signal Type Terminals Wire Size and Type
(1)
(1) See Cable and Wiring Recommendations on page 44 for more information.
Tightening
Torque
N
•m (lb•in)
Flexible
(mm
2 )
Multi-core
(mm
2 )
AWG
Relay Outputs 35 & 36, 75 & 76
0.140…1.500 0.140…1.500 26…14 0.5 (4.4)
Thermistor and
Thermal Switches 78 & 79
78 79 35 36 75 76
Note: Terminals 78 and 79 shown with 1
k
Ω
resistor in place of temperature sensor.
78 79 35 36 75 76