Rockwell Automation 20P PowerFlex Digital DC Drive - Manual (Page 213)

Rockwell Automation Publication 20P-UM001I-EN-P - February 2013 213
Supplemental Drive Information Appendix A
Category Specification
Electrical Input Voltages: Armature: 230 to 690V AC +/- 10%, 3 Phase
Field: 230 to 460V AC +/- 10%, 1 Phase
Control: 115V AC or 230V AC +/- 15%, 1 Phase
(2)
(See AC Input Voltages on page 45 for more detail.)
(2) 115V AC input control power requires a jumper between terminals SA and SB for frame B and C drives only.
Input Frequency: 50/60 Hz +/- 5%
Max. Rate of Change of Input
Frequency: 2 Hz/Sec.
Armature Output Voltage: Two Quadrant Drives Four Quadrant Drives
260V DC @ 230V AC
470V DC @ 400V AC
530V DC @ 440V AC
560V DC @ 460V AC
580V DC @ 480V AC
680V DC @ 575V AC
810V DC @ 690V AC 240V DC @ 230V AC
420V DC @ 400V AC
460V DC @ 440V AC
480V DC @ 460V AC
500V DC @ 480V AC
600V DC @ 575V AC
720V DC @ 690V AC
Output Horsepower (Cont.) 1.5…300 Hp @ 230V AC
2…900 Hp @ 460V AC
50…1250 Hp @ 575V AC
400…1400 Hp @ 690V AC
Output Current: 7…1050 A @ 230V AC
4.1…1494 A @ 400V AC
67.5…1688 A @ 575V AC
452…1582 A @ 690V AC
Overload Capability: 100% rated continuous current
150% rated current for one minute then fault
200% rated current for three seconds then fault
Field Output Voltage 200V DC @ 230V AC
310V DC @ 400V AC
360V DC @ 460V AC
Maximum field output voltage is 0.85 x AC input line voltage.
Controller Current Overload: 150% rated current for one minute
200% rated current for three seconds
Max. Short Circuit Rating: 100,000 A
Control Speed Regulation: (1)
(1) Subject to motor specification and current loop tuning.
All operating modes:
Max. speed: 8000 rpm
Digital reference resolution: 0.1 rpm
Analog reference resolution:
≥
0.25 rpm
With Digital Incremental Encoder or Resolver
Speed feedback resolution 0.5 rpm (based on encoder PPR or
resolver resolution)
Operating range better than 1000:1 rpm, bi-directional
Performance Accuracy ±0.02% typical
170 rad/sec bandwidth
With DC Analog Tachometer
Speed feedback resolution better than 2000:1 rpm
Operating range better than 1000:1 rpm, bi-directional
Performance accuracy ±0.1%
170 rad/sec bandwidth
With Armature Voltage Feedback
Voltage feedback resolution better than 2000:1
Operating range better than 100:1 rpm, bi-directional
Performance accuracy: ±2.0% typical
80 rad/sec bandwidth
Torque Regulation Current feedback resolution better than 2000:1
Performance accuracy: 1.0% typical
500 rad/sec bandwidth