Rockwell Automation 20P PowerFlex Digital DC Drive - Manual (Page 257)

Rockwell Automation Publication 20P-UM001I-EN-P - February 2013 257
HIM Overview Appendix B
Removing/Installing the HIM The HIM can be removed or installed while the drive is powered.
IMPORTANT HIM removal is only permissible in Auto mode. If the HIM is removed while in
Manual mode or the HIM is the only remaining control device, a fault will occur.
Step Key(s) Example Displays
To remove the HIM…
1. Press ALT and then Enter (Remove). The Remove
HIM confirmation screen appears.
2. Press Enter to confirm that you want to remove
the HIM.
3. Remove the HIM from the drive.
To install the HIM…
• Insert into drive or connect cable.
ALT +
Remove Op Intrfc:
Press Enter to
Disconnect Op Intrfc?
(Port 1 Control)