Rockwell Automation 20P PowerFlex Digital DC Drive - Manual (Page 236)

236 Rockwell Automation Publication 20P-UM001I-EN-P - February 2013
Appendix A Supplemental Drive Information
Frame C Transient Noise Filter Circuit Board Fuses
The following fuses are used to protect the MOVs on the Transient Noise Filter
circuit board for frame C drives only.
Figure 76 - Frame C Transient Noise Filter Circuit Board Fuse Locations
Board ID / Revision Designation Fuse (6 x 32 mm)
FL-31 / All F11/F21/F31 25 A, 500V fast
Transient Noise Filter board fuse locations
C and D terminals - DC output to the motor armature