6 meas t - fixed endpoint evaluation, 8 meas t/flow, 1 meas t/flow - overview – Metrohm tiamo 2.3 Patch 1 (process analysis) User Manual
Page 1016: Meas t/flow
5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1000
￭￭￭￭￭￭￭￭
tiamo 2.3 Patch 1 (for Process Analysis)
[New]
Open the dialog window External measured value # in which the
parameters for the external measured value can be entered (see Chapter
5.6.3.11.2, page 932).
[Properties]
Open the dialog window External measured value # in which the
parameters for the external measured value can be edited (see Chapter
5.6.3.11.2, page 932).
[Delete]
Delete the external measured value selected in the table.
5.6.4.7.6
MEAS T - Fixed endpoint evaluation
Dialog window: Method
▶ MEAS pH ▶ Properties... ▶ Additional evalua-
tions
▶ Fixed endpoint evaluation #
Measured quantity
Selection of the fixed measured quantity to which the associated values
for the other quantities are to be interpolated from the list of measured
points.
Selection
Measured value | Time
Default value
Measured value
Fixed value
Value of the fixed endpoint.
Measured value
Range
-20.0 ... 150.0 °C
Time
Range
0.0 ... 999999.9 s
5.6.4.8
MEAS T/Flow
5.6.4.8.1
MEAS T/Flow - Overview
Dialog window: Method
▶ MEAS T/Flow ▶ Properties... ▶ MEAS T/Flow - 'Com-
mand name'
Command for Temperature and gas flow measurements.
Devices
This command can be executed with the following devices:
Sample Processor: 774, 874
Appearance
The command has the following appearance: