Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 372)

4.6 Subwindow Information ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
356 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Sample size unit:
Unit of the sample size.
Input date:
Date and time at which the sample size was entered.
Data source:
Data source for the sample size: for manual input manual is shown, for
automatic input from a balance or barcode reader the corresponding
device name, for data import from a file the corresponding file name.
Note
For Sartorius balances with their own data memory, the memory num-
ber shown in parentheses will be shown in addition to the balance
name (e.g. M-# 429).
Sample position:
Position of the sample.
Identifications
Information about the sample identifications.
ID1…ID16
Display of the sample identifications entered for the sample. The identifi-
cations will only be shown when a value is present.
Note
If for the method variables assigned to the sample data variables ID1
… ID16, Sample size, Sample size unit, Sample position a differ-
ent name is defined in the START command then the title shown here
will consist of this name with the standard name shown in brackets
(e.g. Batch (ID2)).
Live modification
Information on the last live modification of sample data.
Modification reason sample data:
Reason for the sample data modification.