Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 180)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
164 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Functions
[Apply]
Apply the sample data entered in the respective line of the working sam-
ple table. If the end of the table has been reached, then a new line will be
generated automatically. The same function can also be triggered by
pressing the [Enter] key. The next line will in addition however also be
marked automatically when the [Enter] is used.
[Exit]
Closes the input window. The current sample data will not be applied in
the working sample table thereby (this needs to be triggered beforehand
with [Apply]).
3.6.4.9.4 Duplicate sample data
Dialog window: Workplace ▶ Sample table / Determination series ▶ [Edit] ▶ Dupli-
cate ▶ Duplicate
Number
Request as to how often the selected lines are to be duplicated. The new
lines are inserted underneath the selected range.
Range 1 ... 999
Default value 1
3.6.4.9.5 Importing sample data
Dialog window: Workplace ▶ Sample table / Determination series ▶ [Sample
table] ▶ Import data… ▶ Select files to import
Select a *.csv file in this dialog window with the sample data to be impor-
ted.
File name
Input or selection of the file that is to be imported.
Selection File name
File type
Selection of the import format for the import of data from a file (only
*.csv is possible).
Selection *.csv | *.csv (Unicode)
Default value *.csv
[Open]
The sample data from the selected file is inserted at the end of the sample
table.