Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1612)

7.18 Balances ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1596 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Display message
A message is displayed and you can select whether you want to con-
tinue the sequence or cancel it. If the sequence is continued then the
message that the validity period has expired will be automatically saved
with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
7.17.5 Establish a connection to the RS-232 device
Dialog window: Configuration ▶ Devices ▶ Properties ▶ RS-232 ▶ Connect
In order to establish a connection to a RS-232 device the button [Con-
nect] has to be pressed on the tab RS-232.
If then a message is entered in the field besides the button [Send] and is
sent, the message received by the device appears in the large text field.
Text field
The messages sent to and received by the device are shown in the large
text field.
Input field
Input field for a message to be sent to the device.
[Send]
Sends the message shown in the input field to the device.
7.18 Balances
7.18.1 Balance - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties… ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for a balance are set on the following tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ RS-232
Selection of the serial interface the device is connected to.
￭ GLP
Information on GLP tests and GLP monitoring.