Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 468)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
452 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Selection Stop determination | Stop determination and
series
Default value Stop determination
Stop determination
If this option is selected, then the current determination (or condition-
ing) will be stopped. The next determination of the series will be star-
ted afterwards.
Stop determination and series
If this option is selected, then the current determination (or condition-
ing) will be stopped. The next determination of the series will not be
started afterwards.
5.6.2.2.6 Send E-mail
Dialog window: Send E-mail
Use E-mail template
on | off (Default value: off)
If this option is enabled, then the E-mail parameters are loaded from an E-
mail template; if not, then these parameters must be entered.
Parameter for "Use E-mail template = on"
Subject
Subject to describe the message.
Input 150 characters
Default value Message from tiamo – Method 'Method
name' – Command 'Command name'
E-mail template
Selection of the template for sending E-mails.
Parameter for "Use E-mail template = off"
Mail to
E-mail address of the recipient.
Input 200 characters
Subject
Subject to describe the message.
Input 150 characters
Default value Message from tiamo – Method 'Method
name' – Command 'Command name'