Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1650)

7.20 IO controller ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1634 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Output parameters
Output slope
for control task = pump control
Range
-214783647.000 ... 214783647.000
Default value 1
for control task = free controller
Range
-214783647.000 ... 214783647.000
Default value 1
Output offset
for control task = pump control
Range
0% mapping of the output ... 100% mapping
of the output 'Mapping unit of the output'
Default value 0% mapping of the output 'Mapping unit of
the output'
for control task = free controller
Range
0% mapping of the output ... 100% mapping
of the output 'Mapping unit of the output'
Default value 0% mapping of the output 'Mapping unit of
the output'
7.20.8.1.7 General - PWM controller