Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1257)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1241
'Result variable'
Selection of a result variable defined in the method.
Entering a constant
All of the constants of the formula template will be listed.
'Constant'
Entering the constants.
Range -1.0E+99 ... 1.0E+99 (max. 15 places)
Default value 'empty'
Open the molar mass calculator for entering molar masses (see Chapter
2.4.5, page 92).
5.6.8.2.5 CALC - Result properties
5.6.8.2.5.1 Result - Definition
Tab: Method ▶ CALC ▶ Properties... ▶ [New] ▶ [Continue] ▶ Result - Definition
The result calculation is defined on this tab.
Result name
Name of the result. This name will be shown in the result view as well as
in the report. The result name can be used in further calculations as varia-
ble RS.Result name.VAL.
Input 50 characters
Default value Res01 … Res025
Formula
Display of the calculation formula of the result. The formula editor to
enter the calculation formula is opened with a click on or by double-
clicking in the window in which the formula can be entered (see Chapter
2.4, page 32). The result of the calculation formula defines the result type
(Number, Text or Date/time).
Input 1000 characters
Unit
Unit of the result for the output (text only). The unit can be used in further
calculations as variable 'RS.Result name.UNI'.
Input 16 characters