Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1290)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1274 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Shimadzu
Input
ID08
Max. waiting time
Maximum time during which the balance data is waited for.
Value
Range 0.0 ... 9999.9
Default value 1
Device
Selection min | s
Default value min
5.6.10 Miscellaneous commands
5.6.10.1 Miscellaneous commands - Overview
Menu item: Method ▶ Paste ▶ New command...
These commands can be used independently of the connected devices.
The following five commands can be selected:
￭ REQUEST
Requesting sample data.
￭ CALL
Calling tracks (subprograms).
￭ LOOP
Multiple execution of a command sequence.
￭ WAIT
Interrupts the method run.
￭ SEQUENCE
Combines several commands to one command.
5.6.10.2 REQUEST
5.6.10.2.1 REQUEST - Overview
Dialog window: Method ▶ REQUEST ▶ Properties... ▶ REQUEST - 'Command
name'
Command for requesting sample data during the method run. The
data can either be entered manually or sent by a peripheral device (bal-
ance, barcode reader).
Appearance
The command has the following appearance: