Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 170)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
154 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Insert lines Insert lines from the clipboard above the selected line.
Delete lines Delete the selected lines.
Increment Using the cursor, which takes on the form , the region which is to be auto-
matically incremented can be selected from a column in the table. The number
standing at the end of the expression will thereby be automatically increased by
1 in the selected cells of a column, starting from the first selected cell. This
works not only with pure numbers but also with text expressions which end
with a number (e.g. ABC10
→ ABC11 → ABC12…).
Filling Fill the selected lines automatically.
Duplicate Duplicate selected line(s). The new lines are inserted underneath the selected
range.
Mark lines Mark the selected lines with a red background for the line number. Before the
start of such a line the corresponding actions defined under Properties on the
tab Process (see Chapter 3.3.2.4, page 121) will be triggered.
Unmark lines Remove the line marking for the selected lines.
Set lines inexecuta-
ble Set the selected lines to "inexecutable", i.e. these lines will not be executed in
the method run. Such lines are crossed through with a red line.
Set lines executable Set the selected lines to "executable", i.e. they will be executed in the run.
[Sample table] contains the following menu items:
New Load a new and empty sample table.
Load… Load a saved sample table into the working sample table.
Save Save the current sample table under the same name.
Save as… Save the current sample table under a new name.
Sample table test… Check whether or not all sample data in the working sample table is correct.
Print (PDF)… Output the working sample table as PDF file.
Properties… Set the properties of the working sample table.
Import data… Import a sample table from a file with the format *.csv.