Metrohm tiamo 2.3 Patch 1 (process analysis) User Manual
Page 800
Advertising
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
784
■■■■■■■■
tiamo 2.3 Patch 1 (for Process Analysis)
Commands
Depending on the measured value, one of the following two KFT com-
mands can be chosen:
■
KFT Ipol
Voltametric measurement with selectable polarization current (meas-
ured quantity voltage U).
■
KFT Upol
Amperometric measurement with selectable polarization voltage
(measured value current I).
Advertising