Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 175)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 159
continued with [Cont]. If an error occurs during conditioning, neither the
error track nor the exit track are run through.
For methods containing commands with conditioning activated and for
which the option Automatic conditioning is activated in the START
command, the post-conditioning is automatically started for all these
commands with the method loaded and this immediately after the end of
the track containing the conditioning command.
￭ Condition requirement not fulfilled
The status switches to COND BUSY after the start of the post-condi-
tioning. In this status a new determination can be started with [Start]
although the condition requirement is not fulfilled. The conditioning
can aslo be cancelled with [Stop] or interrupted with [Hold] and con-
tinued with [Cont]. If an error occurs during conditioning, neither the
Error track nor the Exit track are run through.
￭ Condition requirement fulfilled
If the conditioning requirement has been fulfilled, then the status will
switch to COND READY. A new determination can be started in this
status with [Start]. Conditioning can also be canceled with [Stop] or
interrupted with [Hold] and resumed with [Cont]. As long as the
determination has not yet been started, the condition requirement will
continue to be monitored on a continuous basis.
3.6.4.9 Working sample table
3.6.4.9.1 Loading new working sample table
Menu item: Workplace ▶ Run ▶ Determination series ▶ [Sample table] ▶ New
A new, empty sample table is loaded as working sample table with the
menu item [Sample table]
▶ New on the tab Determination series,
i.e. all existing sample table lines will be deleted.
3.6.4.9.2 Loading sample table
Dialog window: Workplace ▶ Run ▶ Determination series ▶ [Sample table] ▶ Load
as… ▶ Load sample table
One of the globally available sample tables can be selected in this dialog
window for loading as working sample table.
List of sample tables
The list of sample tables contains information about all the saved sample
tables. The table cannot be edited. With a click on the column title the
table can be sorted according to the selected column in either increasing
or decreasing order.
Name
Name of the sample table.