Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1409)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1393
Cylinder volume
Cylinder volume of the exchange or dosing unit in mL.
Type
Type of exchange unit or dosing unit.
Dosing device
Device name and dosing connection of the device to which the exchange
or dosing unit is fitted (only for intelligent exchange/dosing units).
Titer
Titer (value and unit) of the solution.
Date titer det.
Date on which the last titer determination was carried out.
Next titer determination
Date on which the next titer determination is to be carried out. If titer
monitoring is switched on and the set date is before the current date (i.e.
the titer determination has not yet been carried out) then the date will be
shown in red.
Expiry date
Expiry date of the solution. If solution monitoring is switched on and the
set date is before the current date (i.e. the expiry date has elapsed), then
the date will be shown in red.
With menu item [Edit] ▶ Column display... further columns from the
solution properties can be shown.
Note
Lines that contain red entries will also show the line number with a red
background.
Table view
The solution table cannot be edited directly. With a click on the column
title the table can be sorted according to the selected column in either
increasing or decreasing sequence. The table view can be adapted with
the left-hand mouse button as follows:
￭ Drag the margin between column titles:
Sets the column width
￭ Double-click on the margin between column titles:
Sets the optimal column width