Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1329)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1313
6 Configuration
6.1 Configuration - General
6.1.1 Configuration - Definition
Program part: Configuration
Definition
The term Configuration is used in tiamo to refer to all comprehensive
settings for devices, titrants/solutions, sensors, common variables and rack
data. Included in the configuration are also methods, security settings,
user management, program administration, templates and Audit Trail.
Organization
All configuration data is saved in the Configuration database. In the
case of local server systems (tiamo light, tiamo full), these are to be
found in the Programs directory of the computer on which the program
was installed. In the case of client server systems (tiamo multi), the con-
figuration data base is saved centrally on the server and contains all of the
configuration data of all computers (Clients) which are connected to this
server.
6.1.2 Configuration - Desktop
Program part: Configuration
Configuration symbol
Clicking on the configuration symbol in the vertical bar at the left opens
the program part Configuration while, at the same time the configura-
tion symbol is shown in color.
Elements
The desktop of the program part Configuration comprises the following
elements:
￭ Configuration-specific menu bar.
￭ Configuration-specific toolbar.
￭ Main window in which up to 6 subwindows can be displayed.