Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 166)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
150 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
3.6.4.3 Determination series - Status display
Tab: Workplace ▶ Run ▶ Determination series
The current status of the workplace will be displayed on the tab Determi-
nation series:
Status
Selection READY | BUSY | HOLD | PAUSE | COND BUSY |
COND READY | COND HOLD | ERROR
READY
Ready for starting a determination or for conditioning.
BUSY
Determination is running.
HOLD
Determination is interrupted.
PAUSE
Series interrupted.
COND BUSY
Conditioning is running (is displayed only when no determination is
running).
COND READY
Condition requirement is fulfilled (is displayed only when no determina-
tion is running).
COND HOLD
Conditioning is interrupted (is displayed only when no determination is
running).
ERROR
Error.
3.6.4.4 Determination series - Determination parameters
Tab: Workplace ▶ Run ▶ Determination series
User
If the option User name required is activated in the security settings,
then the short name of the currently logged in user will be displayed in
this field (see Chapter 6.2.2.2, page 1331). This field is then not available
for editing. If work is done without registering, then a user name can be
entered in this field (only in the status READY).
Input 50 characters