Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1473)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1457
Value
Value of common variables. This value can be assigned in a method by a
CALC command or entered manually. For methods that use the common
variable it is available as the variable 'CV.Name.VAL' or 'CV.Name'
(short form) for calculations.
For type Date/Time variables, the date can be selected by pressing in
the dialog window Select date.
Type = Number
Range
-1E+99 ... 1E+99 (max. 15 places)
Type = Text
Input
256 characters
Type = Date/Time
Selection
Date selection
Value (unit)
Designation of the unit. If a value is assigned automatically then the unit
will be automatically entered here. It is available for methods that use the
common variable as variable 'CV.Name.UNI' for calculations.
Input 20 characters
Selection 'empty' | mol/L | mmol/L | µmol/mL | g/L | mg/L
| µg/L | mg/mL | ppm | % | mEq/L | mL | µg
Default value mol/L
Comment
It is possible to enter remarks about the common variable.
Input 256 characters
Assignment date
Date and time at which the last value was assigned; this is entered auto-
matically each time that a value is assigned automatically or manually.
Note
In contrast to automatic value assignment, when assigning the value
manually the date is only entered if the value has really been changed.
Assignment method
Name of the method with which the last value assignment was carried
out. If the value was entered manually then manual will be shown here.