Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1769)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 9 How to proceed?
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1753
The dialog window with the selected sample table opens.
5 Click on the menu item Sample table ▶ Properties… in the dialog
window Sample table.
The dialog window Properties - Sample table opens.
6 Define the properties for the sample table.
7 Click on [OK].
8 Select the line to be modified in the dialog window Sample table.
9 Click on the menu item Edit ▶ Edit line in the dialog window Sam-
ple table.
The dialog window Edit line opens.
10 Select Method from the desired method group, enter Sample data
and click on [Apply].
The sample data entered will be applied in the respective line of the
sample table.
11 Repeat step 8 for each desired determination.
12 Close the dialog window Edit line with [Close].
13 In the dialog window Sample table click on the menu item Sample
table ▶ Save as....
The dialog window Save sample table opens.
14 In the field Name, enter a new name for the sample table or over-
write the old name.
15 Click on [Save].
The edited sample table is saved.