Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 140)

3.3 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
124 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Confirmation necessary to accept data during the determination.
on | off (Default value: off)
If this option is switched on, then data is imported during a determination
only if the Data input dialog of a REQUEST command is opened.
Import from a file
on | off (Default value: off)
If this option is activated, then external data from a file (e.g. via LIMS) will
be imported into a sample table. When this is the case, a check is made to
determine whether the specified import file is available when the sample
table is opened, when the sample table is loaded into the working sample
table and also periodically (every 10 s) when the sample table is open
(although not when the dialog window Edit line is open). If the import
file is available, then the data from this file is automatically inserted at the
end of the sample table. The import file is deleted after each import.
Note
No matter the number of data fields defined on the Display tab, the
import file must always contain for each line the entirety of the sample
data in the format Method name;Sample posi-
tion;ID1;ID2;ID3;ID4;ID5;ID6;ID7;ID8;Sample
size;Unit;ID9;ID10;ID11;ID12;ID13;ID14;ID15;ID16;.
Import file
File that is to be imported. With the file can be selected in the dialog
window Select files for import.
Input File name
Import format
Selection of the import format for the import of data from a file.
Selection *.csv | *.csv (Unicode)
Default value *.csv
*.csv
Format for the import of CSV files with Western European ASCII char-
acter sets.
*.csv (Unicode)
Format for the import of CSV files with Unicode character sets.