Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1136)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1120 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
5.6.5.9 ELT MEAS
5.6.5.9.1 ELT MEAS - Overview
Dialog window: Method ▶ ELT MEAS ▶ Properties... ▶ ELT MEAS - 'Command
name'
Command for measuring calibration buffers for the electrode test
(test of pH electrodes), used together with the command ELT LOOP.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 901, 902, 904, 905,
906, 907
pH/Ion Meter: 867
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command ELT MEAS are configured on the fol-
lowing 2 tabs:
￭ General/Hardware
Parameters for device.
￭ Measuring parameters
Parameters for setting the measurement procedure.
Command variables
The following command variables are generated in the method run by the
command ELT MEAS and can be used in formulas under the designation
'Command name.Variable designation':
Designa-
tion Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
.DBL Total duration for the processing of the command in s