Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 70)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
54 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Designation Description Commands
.TITER Titer value of the solution used for
the command DET, MET, SET,
KFT, STAT,
STDADD dos,
STDADD auto,
ADD, DOS, LQH
TMF Transmission factor (dimension-
less) MEAS TMF
.TOL Tolerance within which a meas-
ured peak can be assigned to a
calibration wavelength. CAL Spec
.TOU Timeout status: 1 = Timeout
expired; 0 = Timeout not
expired RECEIVE, TRANS-
FER, SCAN
.UNI Mapping unit which is defined in
the configuration for an IO port
(Text) ANALOG IN,
ANALOG OUT
.VAL Value of the command variables
(optional, i.e. Command-
name.Portname' = Command-
name.Portname.VAL') (Num-
ber). The value returned is the
value after the ending of the com-
mand. ANALOG IN,
ANALOG OUT,
DIGITAL IN, DIGI-
TAL OUT
.VAR Variance of the calculated result
of the standard addition in the
selected unit STDADD
.VOL Dosed volume STDADD, ADD,
DOS, LQH
2.4.3.5 Result variables
Dialog window: Formula editor ▶ Variables
Result variables are method-specific and are defined in the CALC com-
mand of the method. The field Variables of the formula editor lists all
Result variables which are available for the current method.
Syntax
'RS.Result name.Variable identification'
Examples: 'RS.RS01.VAL' (='RS.RS01'), 'RS.testTime.UNI'
You can select the method variables directly in the formula editor under
Variables
▶ Result Variables in order to avoid syntax errors.