Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 449)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 433
Presentation
The individual tracks are arranged side by side in the method window. The
track name is displayed in the START or TRACK command, respectively,
as well as in the END command.
5.5.2 Track types
5.5.2.1 Main track
Subwindow: Method
The main track contains the main sequence of the method and exists in
each method. It starts with a (see Chapter 5.6.2.2, page 444) and fin-
ishes with an (see Chapter 5.6.2.8, page 458). The method variables
required are defined in the START command. The END command indi-
cates the end of the method run. The main track can neither be deleted
nor moved.