Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1368)

6.3 Configuration data ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1352 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Range 1 ... 999
Default value 1
Selection day(s) | week(s) | month | year(s)
Default value month
Backup directory
Selection of a pre-defined backup directory (see Chapter 6.2.3.2.1, page
1341).
Note
Make sure that you have read and write permission on the selected
directory.
6.3.2.2 Backing up configuration data manually
Dialog window: Configuration ▶ File ▶ Backup ▶ Manually ▶ Backup configuration
data manually
Backup target
Backup directory
Selection of a pre-defined backup directory (see Chapter 6.2.3.2.1, page
1341).
Note
Make sure that you have read and write permission on the selected
directory.
Backup name
Selection of an existing name for the backup file or entry of a new name.
If an existing backup file is selected it will be overwritten.
Input 50 characters
Selection 'Backup name'
Note
If the backup directory is located on a network drive, then the date of
the backup should be added in the Backup name, because the infor-
mation regarding the backup date is not available when the informa-
tion is restored.