Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 67)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 51
Designation Description Commands
.PK{x}.TRN Transmission of the peak x (1…9)
in % MEAS Spec
.PK{x}.CNT Intensity of the peak x (1…9) in
counts MEAS Spec
.PK{x}.CNR Intensity of the peak x (1…9) in
the reference spectrum in counts MEAS Spec
.PK{x}.CND Intensity of the peak x (1…9) in
the dark spectrum in counts MEAS Spec
.PK{x}.WVL Wavelength of the peak x (1…9)
in nm MEAS Spec
.PK{x}.SAT Detector with peak x (1…9) satu-
rated: 1 = saturated;0 = not
saturated MEAS Spec
.RAN Current, absolute rotation angle
of the rack in ° in relation to the
axis of the selected tower (entry
when ending the command) MOVE
.RE{x}.DRC Correlation coefficient for mean
dosing rate in window x (1…9) STAT
.RE{x}.DRS Standard deviation for mean dos-
ing rate in window x (1…9) in
mL/min STAT
.RE{x}.DRT Mean dosing rate in window x
(1…9) in mL/min STAT
.RE{x}.RWL Lower limit of the evaluation win-
dow x (1…9) in s STAT
.RE{x}.RWH Upper limit of the evaluation win-
dow x (1…9) in s STAT
.RES Calculated result of the standard
addition in the selected unit STDADD
.RPO Current rack position (entry at
time of ending the command); 0
means 'not defined' MOVE
.RTE Reference temperature in °C MET Cond, MEAS
Cond, CAL Cond