Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 53)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 37
Method variables
Variable name Description Data type
.VAL Value of the method variable
(optional, i.e. 'MV.Factor' =
MV.Factor.VAL') (Text,
Number or Date/Time) Text, number
or date/time
.OVF Exceeding limits for method
variable (Number: 1 = limit
exceeded, 0 = limit not
exceeded) Number
In the following lines you will find the method variables (sample data)
present in the default settings which appear in the Workplace and
which can be edited and deleted in the START command of the corre-
sponding method.
Sample size.VAL Value of 'Sample size' Number
Sample size.OVF Exceeding limit for 'sample
size' Number
Unit.VAL Value of 'Unit' Text
Unit.OVF Exceeding limit for 'unit' Number
Sample posi-
tion.VAL Value of 'Sample position' Number
Sample posi-
tion.OVF Exceeding limit for 'sample
position' Number
ID1 (…3).VAL Value of 'ID1…3' Text
ID1 (…3).OVF Exceeding limit for 'ID…3' Number
2.4.3.3 Method variables of the next sample data line
Dialog window: Formula editor ▶ Variables
Method variables are method-specific and are defined in the START com-
mand of the method. There the data type (Text, Number, Date/Time)
of the variables is defined. Either sample data variables (Sample size,
Unit, Sample position, ID1…ID16) or fixed values can be assigned to
these variables. The field Variables of the formula editor lists all Method
variables which are available for the current method.
Syntax
'MV.NEXT.Variable name.Variable identification'
These variables contain the sample data of the next line of the sample
table of a determination series. These variables are distinguished in the