Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 167)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 151
Sample number
The sample number is set to 0 for all workplaces at the time of each pro-
gram start. Each time a determination is started, it is incremented by +1. It
can be edited by the user only when it is in the status READY.
Range 0 ... 99999
Default value 0
Remark
Freely definable remarks concerning the determination, that are saved
together with the determination. Prepared sample texts can also be selec-
ted instead of making manual entries (see Chapter 3.5.1, page 130).
Note
The field Remarks can also be modified live while determinations are
running. The context-sensitive menu item Modify remarks is used to
open the dialog window Live modifications (see Chapter 3.6.3.6,
page 138).
Input 100 characters
Autostart
Number of automatic, internal starts of determinations within a sample
series.
The first field after Autostart shows the number of determinations
already carried out (Actual counter). This field cannot be edited, but it can
be reset to 0 in the status READY or PAUSE through the use of the con-
text-sensitive menu item Reset autostart counter.
The second field after Autostart shows the total number of determina-
tions per series to be carried out (Setpoint counter). In its default settings,
it contains the entry Sample table, which refers to the number of lines of
the working sample table. This field cannot be edited except when it is in
the status READY.
Note
The second field after Autostart can also be modified live for a series
that is currently running. The Live modifications window opens with
the context-sensitive menu item Modify autostart counter.
Range 1 ... 999
Default value Sample table