Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 266)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
250 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
4.4.1.4.3.13 Report template - Calibration curve field
Program window: Database ▶ Report template
Calibration curve fields are used for showing calibration or standard addi-
tion curves in the report.
Insert
In order to insert calibration curve field into a report template the corre-
sponding symbol must be selected on the Module bar and placed on the
report template by creating a field with the left-hand mouse key.
Properties
X pos.
x-position within the permitted section.
Range 0.0000 ... (max. page width) mm
Y pos.
y-position within the permitted section.
Range 0.0000 ... (max. page height) mm
Width
Width of calibration curve field.
Range 0.0000 ... (max. page width) mm
Height
Height of calibration curve field.
Range 0.0000 ... (max. page height) mm
Command name
Entry of the name of the command for which the calibration curve is to be
produced. With not defined the first calibration curve present in the
determination with the selected Command type will be produced as
default.
Selection not defined | 50 characters
Default value not defined