Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1404)

6.5 Subwindow Devices ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1388 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Note
Lines that contain red entries will also show the line number with a red
background.
As soon as a determination is started all the devices or device compo-
nents used in the method (dosing devices, measuring inputs) will be
occupied, i.e. they can neither be used at a different workplace nor
used or configured in manual control until the determination has been
finished. The line for an occupied device is shown in gray letters.
Table view
The device table cannot be edited directly. With a click on the column title
the table can be sorted according to the selected column in either increas-
ing or decreasing sequence. The table view can be adapted with the left-
hand mouse button as follows:
￭ Drag the margin between column titles:
Sets the column width.
￭ Double-click on the margin between column titles:
Sets the optimal column width.
￭ Drag the column title:
Moves the column to the required location.
If the contents of a field is larger than the column width, then the whole
contents will be shown as a tooltip if the mouse cursor is kept on the
field.
Functions
The menu [Edit] beneath the device table contains the following menu
items:
New... Add manually a new device connected to the PC via an RS-232 interface (see
Chapter 6.5.2.2, page 1389).
Delete Delete the selected device. Only devices that are not connected can be deleted
(see Chapter 6.5.2.3, page 1389).
Properties... Edit the selected device (see Chapter 6.5.3, page 1391).
Column display... Define columns for the device table (see Chapter 6.5.2.4, page 1389).
Print (PDF)... Output of the device table as a PDF file (see Chapter 6.5.2.6, page 1390).
Ignored devices Open the list of ignored devices (see Chapter 6.5.2.5, page 1390).
Initialize Initialize the selected device (only possible for USB devices).